I've got a T-mobile Dash that I unlocked and installed WM 6.1. However, in that process, the "t-zones" button has stopped functioning as such. Is the phone still t-zones (and more importantly, MyFaves) compatible? I assume with MyFaves, it's simply a matter of T-mobile recognizing the established numbers, but one never wants to assume too much. If that's not the case, is there a need to have access to t-zones for that purpose?
It should still be T-Zones capable (you'll need to enter the correct T-Mo data settings in connection settings if those got wiped out in the unlock and flashing). As for MyFaves, if it's the WinMo 6.1 upgrade for the T-Mo Dash that you flashed, it shouldn't have lost MyFaves. If it was a generic ROM from XDA-Devs or some such place, and the MyFaves software wasn't in the ROM image, I'd *think* the feature would still work, though you wouldn't be able to make any MyFaves changes on the phone itself. It doesn't matter if the phone is unlocked as long as it's running the T-Mobile Dash factory ROM image.
-------------------- Lisa Gade Editor in Chief, MobileTechReview
I made test calls to my MyFaves numbers and checked my current usage online; the calls show up coded as MyFaves calls (hooray!).
Vis-a-vis the T-mo data settings, I think those are fine *if* the primary & secondary DNS settings -- and IP -- are all supposed to be 0.0.0.0.
If I understood you correctly, the T-mo Dash factory ROM image has been replaced by the HTC image on start-up. In fact, as long as I can access/edit MyFave settings via the T-mo website, I'm not as worried about access via the phone.
On another topic, I did drop the phone last week and though it was not a far drop, it ended up damaging the LCD: 2/3 of the screen real estate completely washed out. I ordered a replacement, watched a video on how to disassemble the unit and replace the screen, which I did successfully. However, I notice now that the right 1/3rd of the screen has a slightly darker tint. There seems also to be a faint white line the runs from bottom right to top left. None of that interferes with being able to read information on the unit; just not "factory fresh." Any thoughts as to what might be causing that? Something I did or didn't do in the screen replacement process?
Thanks. I took the unit apart again to see if I'd reassembled it incorrectly, but the dark tint is still there. Probably a defective screen. Still, I can read everything on the screen, so it's more annoying than problematic.